Explanation
Programs
Up to 64 programs can be registered.
A program key can be assigned to each program allowing you to execute the program
simply by pressing its soft key.
Commands
There are two types of executable commands.
Function Commands
(Commands corresponding to the soft keys such as SINGLE and SPAN)
Special Commands
These commands include jump commands, program control commands for conditional
decision, etc., control commands to an external device, and data output commands.
For detailed information on commands, see section 8.3, "Program Function Commands."
Merging a Program
You can combine two different programs into one program.
The copied program is pasted onto the end of another specified program.
8.1 Editing a Program
To Next Page
Loading...
Need help?
General
