YOKOGAWA GX60 - Page 59

55
IM 04L51B01-02EN
Display settings
Trend interval
Trend interval [/div]
Trend rate switching
Second interval [/div]
Group settings
Group number
Group settings
On/Off
Group name
Channel set
Scale image
On/Off
Trip line 1
On/Off
Position
Color
Line width
Trip line 2
On/Off
Trip line 3
On/Off
Trip line 4
On/Off
Message settings
Message number
Message
Message 1
:
Trend settings
Direction
Trend clear
Trend line
Grid
Scale
Digit
Value indicator
Digit of mark
Partial
On/Off
Message
Write group
Power-fail message
Change message
Screen display settings
Bar graph
Direction
LCD
Brightness
View angle
1
Backlight saver
Mode
Saver time
Restore
Monitor
Display background
Scroll time
Jump default display
Calendar display
1st weekday
Changing each value
from monitoring
On/Off
1 GX10/GP10 only.
2
Does not appear when the measurement mode is
High speed.
3 Does not appear when the measurement mode is
Duall interval.
Measurement settings
Scan interval
1
Scan interval
1
Over-range
Value on over-range
Select unit
Main unit, Unit 1 to 6
Module 0 - 9
5
Operation mode
Operation mode
A/D integrate
3
A/D integrate
3
Noise rejection
2
Noise rejection
2
General signal
Lower limit of burnout
set
Upper limit of burnout
set
Chattering filter for
pulse input
4
On/Off
1 Does not appear when the measurement mode is
Duall interval.
2 Appears when the GX90XA type is -H0 and with PID
control modules.
3 Does not appear with high-speed AI or PID control
modules.
4 Pulse input module only
5 Does not appear with AO or DO modules.
When the measurement mode is set to dual interval
Dual interval settings
Scan interval
Scan interval
Measurment group 1
Measurment group 2
Master scan interval
Measurment group
number
Module scan interval
Main Unit, Unit 1 to 6
Module 0 to 9
Measurment group
number
Module 1
Measurment group
number
:
Module 9
Measurment group
number
Recording settings
Recording mode
File type
Event
data(Measurment
group 1)
Recording interval
Recording mode
Data length
Pre-trigger
Trigger source
operation
Event
data(Measurment
group 2)
Recording interval
Recording mode
Data length
Pre-trigger
Trigger source
operation
Continued on the next page
Setup Menu Map
Power Specialties, Inc. | www.powerspecialties.com | (816) 353-6550