Need help?Do you have a question about the YOKOGAWA MC43 and is the answer not in the manual?
General| Brand | YOKOGAWA |
|---|---|
| Model | MC43 |
| Category | Controller |
| Language | English |
Information and guidelines for using this user manual.
Crucial safety instructions for operating the instrument and personnel.
Verifying the instrument model, specifications, and included accessories upon delivery.
Guidelines for proper storage of the instrument to maintain its condition.
Criteria and recommendations for choosing an appropriate installation site.
Overview of the MC43 controller's function and purpose.
Technical details including control types, measurement ranges, and connections.
Explanation of how the controller's proportional, reset, and derivative actions work.
Guide to interpreting model numbers and suffix codes for configuration.
Physical dimensions and mounting interface details of the controller.
Procedures for different mounting methods: 2-inch pipe, panel, and surface.
Instructions for connecting air supply and output signal lines.
How to use the auto-manual transfer system for seamless control switching.
Steps for initial setup and starting the controller.
Procedures for tuning proportional, reset, and derivative parameters for optimal performance.
Common issues, their symptoms, and initial steps for resolution.
Visual guide to locate key internal parts of the controller.
Step-by-step guide for cleaning the restrictor assembly.
Instructions for safely removing and replacing the pneumatic amplifier.
Procedure for replacing clogged filter screens.
Method for cleaning the flapper nozzle to ensure proper operation.
Information required for identifying the controller when contacting support.
Steps for removing and replacing indicator pointers.
Detailed procedure for safely removing the controller's main unit.
Guidance on operating the controller without the derivative unit.
Procedures for checking and performing control unit alignment.
Detailed steps for aligning controllers with proportional, reset, or derivative actions.
Diagram and explanation of pneumatic connection points and their functions.
Introduction to pressure measuring elements and their working principles.
Procedures for calibrating and replacing pressure sensing elements.
Information on thermal elements, their types, and operation.
Instructions for calibrating and replacing thermal sensing elements.
To Next Page