EasyManuals Logo

YOKOGAWA OX100 User Manual

YOKOGAWA OX100
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
iv
IM 11M10A01-01E-
Keep the equipment away from noise-generating devices to minimize the possibility of
malfunction, although it is designed to cope with noise.
The sensor has a limited life, which varies depending on operating conditions. It is
strongly recommended that you replace the sensor once a year from a preventive main-
tenance standpoint, even if sensor deterioration is not observed.
Keep this instruction manual handy for your quick reference during operation and main-
tenance.
u Restrictions on Use
• Donotusetheequipmentinatmospherescontainingcombustible,corrosive,oruegases,
or organic compounds.
• Ifitisusedinsilicongasatmospheres,inowfurnacesornitrogenreowfurnaces,the
equipment must be used in the following system:
The sampling unit, K9424GA, must be used.
The sampling unit requires appropriate maintenance, which is determined by gas
conditions. Filters and activated carbon packs should be replaced at intervals which depend
on the operating conditions.
For best measurement, use new activated carbon packs. Using expired packs may result in
invalid measurement results, or even sensor deterioration.
If you have any questions, please contact your Yokogawa representative.
uHowtoUseThisManual
The structure of this manual is as shown in the table below. This table shows which chapters you
are recommended to read when performing the corresponding tasks.
Chapter to refer to:Unpacking
installation
Initial
setting
Daily
operation
Changing
settings
Maintenance
Maintenance
troubleshooting
Chapter 1. Overview
Chapter 2. Installation
Chapter 3. Operation
Chapter 4. Troubleshooting
Appendix 1. Sampling Unit
Appendix 2. Calibration Gas Kits
Safety precautions
CMPL (Parts List)
: Read and completely understand before operating the equipment.
: Read before operating the equipment, and refer to it whenever necessary.
4th Edition : Oct. 23, 2019-00

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the YOKOGAWA OX100 and is the answer not in the manual?

YOKOGAWA OX100 Specifications

General IconGeneral
BrandYOKOGAWA
ModelOX100
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals