YOKOGAWA OX100 - Installation: Location and Mounting; Optimal Installation Location Criteria

<2. Installation >
2-4
IM 11M10A01-01E
2.2 InstallationLocationfortheInstrument
Install in a location that meets the following requirements:
CAUTION
(1) Instrument panel or rack
This product should be mounted on an instrument panel or in a rack.
(2) Well-ventilated location
To keep instrument cool, mount in a well-ventilated location
(3) Location with minimal vibration
Install in a location with minimal vibration.
Instrumentaccuracymaybea󰀨ectediftheinstallationlocationissubjecttovibration.
(4) Horizontal location
As far as possible, the installation location should be horizontal.
Avoid locations with the following conditions:
CAUTION
(1) In direct sunlight or near hot objects
Choose an installation location with stable temperature (around ambient 23°C).
Placingthisinstrumentindirectsunlightornearhotobjectsmayadverselya󰀨ect accuracy.
(2) Location with oily smoke, warm or humid air, dust, corrosive gas Avoid such locations.
(3) NearasourceofelectromagneticeldsElectromagneticeldsmaya󰀨ecttheaccuracyof
the instrument.
4th Edition : Oct. 23, 2019-00