YOKOGAWA PH200

IM 12B6C2-E-H
31
1. Access service
*SERV = Service settings
Access to commissioning mode
Select service function
Move pointer to SERVICE
Confirm selection
2. Enter code to slect required function
Display will show *CODE
Enter access code to select
routine
Select digit to adjust
Adjust code for entry
Confirm selection
3. Adjust setting
(see individual routines)
Select digit to adjust
Adjust value
Confirm adjusted value
Return to step 1 or
Return to measurement
7-2. Access to service settings
OUTPUT
SET HOLD
SERVICE
YES
NO
MODE
ENT
OUTPUT
SET HOLD
SERVICE
YES
NO
MODE
ENT
.
. .
OUTPUT
SET HOLD
SERVICE
YES
NO
YES
NO
MODE
*
ESCAPE TO MEASURE can be used at any stage to abort operation.
WARNING: If the HOLD function is activated the instrument returns with the question HOLD (flashing); answer YES or NO or
MODE again to return to measurement.
MODE
x
NO
YES
>
ENT
^
>
^
ENT
YES
MODE