YOKOGAWA RAMC User Manual

<6. ELECTRONIC TRANSMITTER (-E)>
6-17
IM 01R01B02-00E-E 12th edition October 01, 2014 -00
All Rights Reserved. Copyright © 2003, Rota Yokogawa
6.2.12 Switching between standard / Indicator on extension (F64)
F64 allows switching between the standard calibration table and a calibration table of the remote version
(option /A16 for high temperatures). The adjustment has to be performed according to the RAMC type (MS code).
This is done as follows:
Description Selection Key Indication
Change to setting mode Enter
Display mode
F1-
Setting mode 5 x →
Enter
3 x →
F6-
F61
F64
Selection
or
Standard
Remote Version
Enter
→
Enter
F64 -1
F64 -2
F64
Back to display mode
↑
↑
F6-
Display mode
Note: If you press “↑" instead of “Enter”, you can return from the selected point to the previous menu
without activating the displayed parameter.
6.2.13 Master Reset (F65)
If the unit shows aberrant behavior or does not execute functions any longer, function F65 allows a master
reset of the micro controller.
Attention: All parameter settings are reset to factory settings (see operation menu).
The master reset is executed as follows:
Description Selection Key Indication
Change to setting mode Enter
Display mode
F1-
Setting mode 5 x →
Enter
4 x →
F6-
F61
F65
Selection Reset Enter
Enter
F65 -1
F65
Back to display mode
↑
↑
F6-
Display mode
Note: If you press “↑" instead of “Enter”, you can return from the selected point to the previous menu
without activating the displayed parameter.

YOKOGAWA RAMC Specifications

General

Brand	YOKOGAWA
Model	RAMC
Category	Measuring Instruments
Language	English