<8. SERVICE>
8-6
IM 01R01B02-00E-E 12th edition October 01, 2014 -00
All Rights Reserved. Copyright © 2003, Rota Yokogawa
8.2 Template for sending back to service
Sending an instrument back to service
Installation and operation of the Rotameter RAMC in compliance with this manual is generally trouble-free.
In case a RAMC has to be sent for repairs or checking to our service, please observe the following:
Due to legislation for the protection of the environment and for the safety of our staff, YOKOGAWA may only
ship, repair and check sent devices on the condition that this does not constitute any risk to environment
and staff.
YOKOGAWA can only process your returned RAMC if you attach a certicate of harmlessness according to
the following sample.
If the unit has been in contact with corrosive, poisonous, ammable or water polluting substances, you
must,
- ensure that all parts and hollow spaces of the unit are free of these dangerous substances.
- attach a certicate of harmlessness to the returned unit.
Please understand that YOKOGAWA cannot process your returned unit without such a certicate.
To Next Page
Loading...
Need help?
General
