YOKOGAWA RAMC User Manual

<7. HART-COMMUNICATION>
7- 6
IM 01R01B02-00E-E 12th edition October 01, 2014 -00
All Rights Reserved. Copyright © 2003, Rota Yokogawa
Revisions #´s Universal rev.
R
Fld Dev. rev.
R
HW rev.: R
FW rev.:
R
ADJ-EE rev.: R
CAL
-
EE rev.: R
Review Model
R
Dev Id
R
Manufacturer
R
Distributor
R
Flow Snsr s/n
R
Final assy no
R
Write protect
R
Tag
R/W
Descriptor
R/W
Message
R/W
Date
R/W
Poll addr
R/W
Num req preams
R
Num resp preams W
Long tag R/W
MS Code R
Universal rev.
R
Fld. Dev. rev.
R
HW rev.: R
FW rev.:
R
ADJ-EE rev.: R
CAL
-
EE rev.: R
7.4. Description of the HART5
®
- Parameter
HOT KEY Write protect Read Status of write protection
Enable wrt 10min Enable writing for 10 minutes by entering password. After writing
a parameter the time of 10 minutes starts again.
New password Selection of a new password by entering up to 8 character
If 8 blanks are entered as new password, write protection is disabled.
If the user password is lost, a joker password is available from the
YOKOGAWA service department.
Online
This shows current process data.
Flow Flow in selected measurement unit
Flow AO Current output in mA
Flow URV Upper range value related to the current output
Flow LRV Lower range value related to the current output
The generic menu structure differs to the implemented menu structure. The generic mode does not support all
implemented commands. The parameters with grey background are also contained in generic mode.

YOKOGAWA RAMC Specifications

General

Brand	YOKOGAWA
Model	RAMC
Category	Measuring Instruments
Language	English