How do I fix E17 error on my YOKOGAWA Transmitter?
- TTerry DominguezSep 9, 2025
To fix error E17 on a YOKOGAWA Transmitter, reprogram the device, as the error indicates an incorrect configuration by the user.

How do I fix E17 error on my YOKOGAWA Transmitter?
To fix error E17 on a YOKOGAWA Transmitter, reprogram the device, as the error indicates an incorrect configuration by the user.
What to do if YOKOGAWA SC202G displays E18 error?
To resolve error E18 on your YOKOGAWA Transmitter, reprogram the device. This error indicates that wrong data was programmed.
How to solve E19 error on YOKOGAWA Transmitter?
To resolve error E19 on your YOKOGAWA Transmitter, reprogram the device, as this error indicates an incorrect user configuration.
What does E13 error mean on a YOKOGAWA SC202G?
If your YOKOGAWA Transmitter displays error E13, it indicates poor water quality. Check the ion exchangers.
What to do if YOKOGAWA SC202G shows E10 error?
If your YOKOGAWA Transmitter displays error E10, try again. If unsuccessful, contact Yokogawa. The error indicates a fault in the electronics.
| Brand | YOKOGAWA |
|---|---|
| Model | SC202G |
| Category | Transmitter |
| Language | English |
Describes the main function of the transmitter, conductivity or resistivity measurement.
Provides an overview of the product and its general description.
Describes the EXA operator interface and access to different operation levels.
Details the commissioning mode for setting up the transmitter for specific applications.
Explains the conditions that necessitate calibration of the instrument.
Outlines the minimal periodic maintenance required for the EXA 202 transmitter.
Explains the diagnostic checks performed by the EXA SC202.
Details the physical aspects of installation and the transmitter's dimensions.
Details the procedure for setting up passcode protection for the instrument.
Details specific functions accessible via service codes.
Details user settings for non-linear output tables using codes 31 and 35.










