YOKOGAWA SMARTDAC+ GX10 User Manual

1-167
IM 04L51B01-01EN
Configuring the GX/GP
1
2
3
4
5
App
Index
Date format
Set the date display format.
Options Display example
1
Year Month Day 2012/12/30
Month Day Year 12/30/2012
Date Month Year 30/12/2012
1 In the display examples, the delimiter is a slash (/).
Scope
The format is applied to the date displayed on the screen. It does not change the date format
on the date in the output data via communications, the date saved along with the data, and
the date used in the data file names.
Delimiter
Set the date delimiter.
Month indicator
Set whether to spell out months or use numbers on the screen.
1.19.2 Setting the Interval for Calculating the Rate-of-Change for Rate-of-
Change Alarms
Path
GX/GP: MENU key > Browse tab > Setting > Setting menu System settings > Alarm
basic settings
Web application: Config. tab > System settings > Alarm basic settings
Hardware configurator: System settings > Alarm basic settings
Description
Rate of change
Setup Item Selectable Range or Options Default Value
Decrease 1 to 32 1
Increase 1 to 32 1
Decrease
Set the interval for the rate-of-change computation of the low limit on rate-of-change alarm
in terms of the number of measured data values (1 to 32).
1
The actual interval is obtained by
multiplying the value specified here by the scan interval.
1 The number of measured data values is the number of samples.
Increase
Set the interval for the rate-of-change computation of the high limit on rate-of-change alarm
in the same manner as the interval for the low limit on rate-of-change alarm.
1.19ConfiguringSystemSettings(Timezone,displaylanguage,statusrelay,etc.)

YOKOGAWA SMARTDAC+ GX10 Specifications

General

Brand	YOKOGAWA
Model	SMARTDAC+ GX10
Category	Voice Recorder
Language	English