YOKOGAWA WT210 User Manual

10-17
IM 760401-01E
GP-IB Interface (Option)
10
Command Description
/HAM (option) HA m (Harmonics Analize) sets harmonic measurement ON/OFF
HE m (Harmonics Eiement) sets harmonics element
PS m (Pll Source ) sets PLL source
DF m (Distortion Formula) sets distortion formula
OR (harmonics ORder) sets display order
OH m1,m2 sets communication or output block
(Output Harmonics function)
/DA (option) OA m1,m2,m3 (Output Analog) sets output items yourself
OAD m (Output Analog Default)sets default output items
RT m1,m2,m3 sets integration time
(integrate Rated Time)
/CMP (option) YO m (relaY On) sets comparator function ON/OFF
YM m (relaY Mode) sets comparator mode
DY m (Display relaY) sets display relay ON/OFF for comparator
YC m (relaY Channel) sets the display channel when comparator
display is ON
OY m1,m2,m3,m4,m5 sets the output relay function for normal
(Output relaY function) measurement
OYH m1,m2,m3,m4,m5,m6 sets the output relay function for harmonic
(Output relaY Harmonic function) measurement
Note
If commands relating to options are used on instruments which do not have the options
installed, “Err. 11” is displayed. Also, there are no responses to inquiries.
10.7 Commands (before the IEEE 488.2 Standard)

YOKOGAWA WT210 Specifications

General

Brand	YOKOGAWA
Model	WT210
Category	Measuring Instruments
Language	English