YOKOGAWA WT210

14-49
IM 760401-01E
Communication Commands 2 (System of Commands Complying to the IEEE 488.2-1992 Standard)
14
14.5 Before Programming
Environment
• Model: IBM-compatible PC
• Language: Visual Basic Ver5.0 Professional Edition or later.
• GP-IB board: AT-GPIB/TNT IEEE-488.2 by National Instruments.
Settings on Visual Basic
Standard modules used: Niglobal.bas
Vbib-32.bas
WT210/WT230 Settings
GP-IB address
• The sample programs given in this chapter use a GP-IB address of 1 for the
WT210/WT230.
• Set the GP-IB address to 1 according to the procedures described in section 10.5.