14-2 IM 760401-01E
17 Size of storage area for protected user data if PUD and *PUD? are used.
*PUD and *PUD? are not supported.
18 Length of resource name if
*RDT and *RDT? are used.
*RDT and *RDT? are not supported.
19 Change in status if *RST,
*LRN?, *RCL, and *SAV are used.
*RST
Refer to section 14.3.15 Common Command Group.
*LRN?, *RCL, *SAV
These commands are not supported.
20 Execution range of self-test using *TST?
Refer to section 14.3.15 Common Command Group.
21 Structure of extended return status
Refer to section 14.4.
22 To find out whether each command is performed in parallel or sequentially
Refer to section 14.2.6, “Synchronization with the Controller,” or Section 14.3.
23 Functions performed until a message indicating completion of the command is displayed
Refer to the function description of each command in Section 14.3, and to the
corresponding chapters.
14.1 Overview of IEEE 488.2-1992
To Next Page
Loading...
Need help?
General
