14-34 IM 760401-01E
• VCON,ACON,WCON : 49(or 29) data
Harmonic relative content (2nd order)→ · →harmonic relative content (50(or 30)th order)
•
PF : 1 data
Outputs the power factor of the fundamental (1st order).
•
VDEG : 50(or 30) data
Phase angle between the1st order voltage and 1st order current→Phase angle
between the 2nd order voltage and 1st order voltage→ · · · →Phase angle between
the 50(or 30)th order voltage and the 1st order voltage.
•
ADEG : 50(or 30) data
Phase angle between the1st order voltage and 1st order current→Phase angle
between the 2nd order current and 1st order current→ · · · →Phase angle between
the 50(or 30)th order current and the 1st order current.
Each data is divided by a comma “
,” and ended by the terminator <RMT>.
Output Example of Harmonic Measurement Data
• Output example for model 760503, after having sent the following commands. (Refer
also to page 9-23 for output example of external plotter).
(Sent) MEASURE:HARMONICS:ITEM:PRESET VPATTERN
MEASURE:HARMONICS:VALUE?
(Received data)
60.00E+00,12.01E+00,49.98E+00,49.62E+00,0.03E+00,5.50E+00,
0.01E+00,1.99E+00,0.02E+00,1.01E+00,0.01E+00,0.62E+00,
0.00E+00,0.41E+00,0.00E+00,0.30E+00,0.00E+00,0.22E+00,
0.00E+00,0.17E+00,0.00E+00,0.14E+00,0.00E+00,0.12E+00,
0.00E+00,0.09E+00,0.00E+00,0.08E+00,0.00E+00,0.07E+00,
0.01E+00,0.06E+00,0.00E+00,0.05E+00,0.00E+00,0.04E+00,
0.00E+00,0.05E+00,0.00E+00,0.03E+00,0.00E+00,0.03E+00,
0.01E+00,0.03E+00,0.00E+00,0.03E+00,0.00E+00,0.02E+00,
0.00E+00,0.02E+00,0.00E+00,0.02E+00,0.00E+00,0.06E+00,
11.09E+00,0.02E+00,4.01E+00,0.03E+00,2.03E+00,0.01E+00,
1.24E+00,0.01E+00,0.82E+00,0.01E+00,0.60E+00,0.00E+00,
0.45E+00,0.01E+00,0.35E+00,0.01E+00,0.28E+00,0.00E+00,
0.23E+00,0.01E+00,0.19E+00,0.01E+00,0.16E+00,0.01E+00,
0.14E+00,0.01E+00,0.11E+00,0.01E+00,0.10E+00,0.01E+00,
0.08E+00,0.01E+00,0.09E+00,0.01E+00,0.07E+00,0.00E+00,
0.06E+00,0.01E+00,0.06E+00,0.01E+00,0.05E+00,0.01E+00,
0.05E+00,0.01E+00,0.05E+00,0.01E+00,0.04E+00,0.01E+00
(Data contents)
Frequency of PLL source: 60.00E+00 (Hz)
Harmonic distortion factor of voltage: 12.01E+00 (%)
Rms value of 1st to 50th order: 49.98E+00 (V)
Fundamental measured value (1st order): 49.62E+00 (V)
Harmonic measurement value (2nd order): 0.03E+00 (V)
::
Harmonic measurement value (50th order): 0.00E+00 (V)
Harmonic relative content (2nd order): 0.06E+00 (%)
::
Harmonic relative content (50th order): 0.01E+00 (%)
The data consist of 102 items in total.
14.3 Commands