4-13
IM 760401-01E
Setting Measurement Conditions and Measurement Range
4
Turning Scaling ON/OFF
Select the scaling menu once again after having set the scaling constant. The initial
value is oFF.
• on: Selecting on and pressing the ENTER key will start scaling and the SCALING
indicator will light.
• oFF: Selecting oFF and pressing the ENTER key will stop scaling and SCALING
indicator will extinguish.
Note
If scaling constant × measurement range exceeds 9999M(10
6
), computation overflow (--OF-)
is indicated.
4.5 Setting the Scaling Value When External PT/CT is Used
To Next Page
Loading...
