YOKOGAWA YTA110 User Manual

IM 01C50B01-01E
3-3
3. PART NAMES AND FUNCTIONS
(6)Unit display
The unit specified as the unit of process in the process
variable display column in Item (5) is lit. The output
display is fixed to mA or %.
(7)Display of sensor type and number of wire
connections
Displays process variable/output items, the number of
sensor wiring connections and the multidrop address in
dot matrix (only applies to HART communication). In
the event of hardware error, “FAIL” is displayed.
Process variable: To display the process variable
value in the process variable
display in Item (5), display the type
of applicable process variable
(“PV”, “SV”, “TV”).
Output display: To display the output value in the
process variable display in Item
(5), display “OUT”. During the
output of sensor burnout, “Abn”
and “OUT” are alternately dis
played.
WIRE: Displays the number of wiring
connections. There are two wiring
connections for thermocouple
input, while there are two to four
connections for thermometer
resistor; these are displayed
alternately with the sensor type.
The display can be hidden by
setting an applicable parameter.
Note that the DIF and AVG display
does not allow the sensor type to
be displayed.
TYPE: Displays the type of sensor. Note
that the DIF and AVG display does
not allow the sensor type to be
displayed. If the sensor is custom-
ordered, “Z1” and “Z2” are
displayed.
Multidrop address: If the multidrop address is 1
through 15 in HART communica-
tion, the output display brings up
these addresses instead of display
ing “OUT”.
Upon shipment from the factory, the indicator is set as
follows.
Table 3.2 Setting of Indicator upon Shipment from the
Factory
T0302.EPS
Display location
Output bar chart display is on.
Sns1 is lit.
PV value and output value
(mA) are alternately displayed.
The unit specified upon
shipped from factory and mA
are lit.
“PV” and “OUT” are displayed
alternately.
Contents
Output bar chart display
Display of sensor type and
number of wire connections
Unit display
Process variable display
Input display

YOKOGAWA YTA110 Specifications

General

Brand	YOKOGAWA
Model	YTA110
Category	Transmitter
Language	English