YooFab RFLEGO - General Assembly Instructions; Understanding Electronic Kits; YooFab Kit Advantages; Kit Assembly Best Practices

To Next Page

To Previous Page

Common Instructions for all RFLEGO kits

What is an electronic kit?

Generally, kits are composed of electronic components, a circuit diagram (schematic),

assembly instructions and often a printed circuit board (PCB) or another type of

prototyping board.

YooFab

Electronic Kits:

• Easy to build

• Serve a use that is market driven

• Provide valuable hands-on experience in electronics

• Feature well-written instruction books

• Feature a full description of how the circuit works

• All YooFab

kits require soldering skills

• The PDF instructions document describes the steps necessary to completely

build the kit.

How to build your kit

1. Read the instructions twice, even if you have much experience with electronics.

2. Verify the contents of the kit; use the piece of polystyrene supplied to place the

components prior to building.

3. Prepare your work area; keep it clean and organized.

4. Follow all instructions in the prescribed sequence.

5. Visually check the finished kit. Check that the soldered joints are bright and that

there are no obvious errors.

6. Continuity check. Using a digital voltmeter, check the entire circuit.

7. In case the kit does not work, take photos and send us an email.

ASSEMBLY INSTRUCTIONS

RFLEGO Active Antenna Receiving Loop