General safety guidelines
Important: Read before proceeding.
This equipment is a relatively complicated apparatus. During rigging, installation, operation,
maintenance, or service, individuals might be exposed to certain components or conditions
including, but not limited to: heavy objects, refrigerants, materials under pressure, rotating
components, and both high and low voltage. Each of these items has the potential, if misused or
handled incorrectly, to cause bodily injury or death. It is the obligation and responsibility of rigging,
installation, and operating and service personnel to identify and recognize these inherent hazards,
protect themselves, and proceed safely in completing their tasks. Failure to comply with any of
these requirements could result in serious damage to the equipment and the property in which it is
situated, as well as severe personal injury or death to themselves and people at the site.
This document is intended for use by owner-authorized rigging, installation, operating, and service
personnel. It is expected that these individuals possess independent training that will enable them
to perform their assigned tasks properly and safely. It is essential that, before performing any
task on this equipment, this individual shall have read and understood the on-product labels, this
document and any referenced materials. This individual shall also be familiar with and comply
with all applicable industry and governmental standards and regulations pertaining to the task in
question
Safety symbols
The following symbols are used in this document to alert the reader to specific situations:
DANGER
Indicates a possibly hazardous situation which will result in death or serious injury if correct care is not
taken.
WARNING
Indicates a potentially hazardous situation which will result in possible injuries or damage to equipment
if correct care is not taken.
CAUTION
Identifies a hazard which could lead to damage to the machine, damage to other equipment and
environmental pollution if correct care is not taken or instructions and are not followed.
Note: Highlights additional information useful to the technician in completing the work being
performed correctly.
7YMAE Air-Cooled Inverter Scroll Chiller and Heat Pump
To Next Page
Loading...
