Zebra 105Se - Printer Operation and Installation Index

FEED Key and PAUSE Key Self Test ......3-12
FEED Key Self Test ....................3-11
Front Panel Keys
CANCEL Key......................3-4
FEED Key.........................3-4
MODE Key........................3-5
PAUSE Key .......................3-4
Front Panel Lights
Calibrate ..........................3-6
Darken............................3-6
Data..............................3-6
Paper/Ribbon ......................3-6
Pause.............................3-6
Position ...........................3-6
Power ............................3-6
Printhead..........................3-6
I
Input and Output Signals (Standards Used)
EIA RS-232 and CCITT V.24 .........5-2
Inspection .............................2-1
Interface Cables
Crossover (Null Modem) .............5-4
Straight Through....................5-4
Interface Converter (When Required) .......1-1
Interfaces
Parallel ..........................1-13
RS-232 ..........................1-13
L
Label Available Sensor...................3-3
Label Formats .........................3-14
Label Top (Adjusting) ...................4-6
Loading
Media ............................2-8
Ribbon (105Se).....................2-4
Ribbon (160S)......................2-7
Lubrication ............................6-4
M
Media
Fanfold ..........................2-11
Loading...........................2-8
Roll ..............................2-8
Media (Types to Use)
Card Stock.........................1-4
Continuous Roll ....................1-4
Fanfold ...........................1-4
Media Requirements.....................1-3
Media Rest Position (Adjusting)............4-6
Media Sensing Modes
Black-Mark Sensing Mode ............3-2
Transmissive Sensing Mode ...........3-2
Media Sensor Adjustments
Lower ............................7-4
Upper ............................7-3
Media Sensor Sensitivity Adjustment........7-5
Media Transport Mechanism ..............1-2
Media Transport Modes
Cutter ............................3-3
Peel-Off...........................3-3
Rewind ...........................3-3
Tear-Off ..........................3-2
Memory Option.........................9-4
MODE Key............................3-5
MODE Key Self Test ...................3-12
Model Designation Label .................1-1
N
Null Modem ...........................5-4
Index - 2 Zebra S-Series User’s Guide
102