Zebra 105SL Plus User Manual

95
Printer Configuration and Adjustment
Changing Printer Settings
7/3/13 P1056468-002
Idle Display Select the information shown on the printer’s display when the printer is idle.
Accepted values:
• FIRMWARE (FW) VERSION
• MM/DD/YY 24 HR
• M/DD/YY 12 HR
• DD/MM/YY 24 HR
• DD/MM/YY 12 HR
Related ZPL command(s): none
SGD command used:
none
Control panel menu item: IDLE DISPLAY on page 32
Printer web page: N/A
RTC Date This parameter allows you to set the date to display in the Idle Display.
Related ZPL command(s): ^ST
SGD command used: none
Control panel menu item: RTC DATE on page 32
Printer web page: none
RTC Time This parameter allows you to set the time to display in the Idle Display.
Related ZPL command(s): ^ST
SGD command used: none
Control panel menu item: RTC TIME on page 32
Printer web page: none
Password Level This parameter allows you to select whether certain factory-selected menu items or all
menu items are password protected.
Accepted values:
• SELECTED ITEMS
• ALL ITEMS
Related ZPL command(s): none
SGD command used: none
Control panel menu item: PASSWORD LEVEL on page 35
Printer web page: none
Run a ZBI
Program
If you have ZBI 2.0 installed, you may choose to run a ZBI program that you have
downloaded to your printer.
Accepted values:
N/A
Related ZPL command(s):
^JI, ~JI
SGD command used:
zbi.control.run
Control panel menu item:
Run the Specified ZBI Program* on page 32
Printer web page:
Directory Listing
Table 8 • Maintenance and Diagnostic Tools (Continued)

Zebra 105SL Plus Specifications

General

Weight	50 lbs / 22.7 kg
Humidity	20-85% non-condensing
Print Method	Thermal Transfer
Resolution	203 dpi (8 dots/mm)
Max Print Width	4.09 inches / 104 mm
Max Print Speed	12 inches per second / 305 mm per second
Memory	16 MB SDRAM, 8 MB Flash
Media Width	0.79 inches / 20 mm to 4.5 inches / 114 mm
Media Thickness	0.003 inches / 0.076 mm to 0.012 inches / 0.305 mm
Media Types	Continuous, die-cut, black mark
Ribbon Width	2.00 inches / 51 mm to 4.33 inches / 110 mm
Ribbon Length	1476'/450 m
Connectivity	Parallel, Serial
Optional Connectivity	Ethernet, Wireless
Power Requirements	90-264 VAC; 48-62 Hz
Operating Temperature	40°F to 105°F / 5°C to 40°C
Storage Temperature	-40°F to 140°F / -40°C to 60°C