Zebra 400 User Manual

This printer
(Figure 2)
operates in
Peel-Off mode.
In Peel-Off,
backing material
is peeled away
from the label as
it is printed.
After this label is
removed from the
printer, the next
one is printed.
To load media,
refer to “Loading
the Media --
Peel-Off Mode”
in Getting Ready
to Print.
Printers like this
(Figure 3) are
equipped for
Cutter mode.
When in cutter
mode, the printer
automatically
cuts the label
after it is printed.
Then, the cutter
catch tray
“catches” the
label.
To load the
media, refer to
“Loading the
Media -- Cutter
Mode” in Getting
Ready to Print.
S400 & S600 User’s Guide 3
Backing
Rewind Spindle
Figure 2
Cutter
Module
Figure 3
11

Zebra 400 Specifications

General

Brand	Zebra
Model	400
Category	Printer
Language	English