12
Getting Started
Introduction
This chapter explains how to set the device up for the first time.
Unpacking
Carefully remove all protective material from around the tablet and save the shipping container for later storage
and shipping.
Verify that you received all equipment listed below:
• Tablet with lithium-ion battery
• Quick Reference Guide.
Inspect the equipment for damage. If you are missing any equipment or if you find any damaged equipment,
contact the Zebra Support Center immediately. See Provide Documentation Feedback on page 11 for contact
information.
Getting Started
In order to start using the device for the first time:
• Install microSD card
• Install nano SIM Card (ET56 only)
• Charge the device
• Perform basic configuration
To Next Page
Loading...
