57
USB Communication
Introduction
This chapter provides information for transferring files between the device and a host computer.
Connecting to a Host Computer via USB
Connect the tablet to a host computer using a USB-C cable to transfer files between the tablet and the host
computer.
CAUTION: When connecting the tablet to a host computer, follow the host computer’s instructions for connecting and dis-
connecting USB devices, to avoid damaging or corrupting files.
Transferring Files
NOTE: Use Transfer files to copy files between the device (internal memory or microSD card) and the host computer.
1. Connect a USB-C cable between the device and a host computer.
2. Pull down the Notification panel and touch USB charging this device.
By default, Charge this device is selected.
Figure 68 Use USB to Dialog Box
3. Touch Transfer files.
NOTE: After you change the setting to Transfer files, and then disconnect the USB cable, the setting reverts back to Charge
this device. If the USB cable is reconnected, select Transfer files again.
4. On the host computer, open a file explorer application.
To Next Page
Loading...
