Zebra ET51 - Transferring Files using Photo Transfer Protocol; Disconnecting from a Host Computer

58
5. Locate the device as a portable device.
6. Open the SD card or the Internal storage folder.
7. Copy files to and from the device or delete files as required.
Transferring Files using Photo Transfer Protocol
NOTE: Use Photo Transfer Protocol (PTP) to copy photos from either the microSD card or internal memory to the host
computer.
1. Connect the USB-C Cable to the tablet.
2. Pull down the Notification panel and touch USB for Charging.
Figure 69 USB Dialog Box
3. Touch Photo transfer (PTP).
4. On the host computer, open a file explorer application.
5. Open the SD card or the Internal storage folder.
6. Copy or delete photos as required.
Disconnecting from a Host Computer
CAUTION: Carefully follow the host computer’s instructions to unmount the device and disconnect USB devices correctly to
avoid losing information.
7. On the host computer, unmount the device.
8. Remove the USB-C cable from the device.