Zebra ET51 - Barcode Input; Enabled; Scanner Selection

69
Figure 80 Maximized DCP
Swipe down to return to button mode.
Barcode Input
Use the Barcode Input options to configure the Barcode Scanner Input Plug-in for the profile.
Enabled
Enables or disables this plug-in. A check in the checkbox indicates that the plug-in is enabled.
Scanner Selection
Configures which scanning device to use for barcode data capture when the profile is active.
• Auto - The software automatically determines the best scanning device.
• DS3608 USB SSI Scanner - Scanning is performed using the optional USB scanner.
• Camera Scanner - Scanning is performed with the rear-facing camera.
• Pluggable Serial SSI Scanner - Scanning is performed using the Expansion Back.
• Bluetooth Scanner - Scanning is performed using the optional Bluetooth scanner.
• RS6000 Bluetooth Scanner - Scanning is performed using the RS6000 Bluetooth scanner.
• DS3678 Bluetooth Scanner - Scanning is performed using the DS3678 Bluetooth scanner.
• DS2278 Bluetooth Scanner - Scanning is performed using the DS2278 Bluetooth scanner.
• DS8178 Bluetooth Scanner - Scanning is performed using the DS8178 Bluetooth scanner.