Zebra G SERIES Service Manual

8/27/08 Thermal Transfer G-Series
TM
Service Manual 980618-001 A
2
Cleaning and Maintenance
The printers are manufactured and tested under a strict quality management program. Zebra
Technologies uses only high quality components and materials in its printers. Although only
minimal routine maintenance is required, following these simple maintenance guidelines will
ensure longer life with quality printing performance.

Zebra G SERIES Specifications

General

Print Method	Thermal Transfer
Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Maximum Print Length	39 inches (991 mm)
Media Sensors	Reflective, Transmissive
Media Length	39"/991 mm
Programming Languages	ZPL II
Connectivity	USB, Serial, Parallel, Ethernet (depending on model)