Zebra G SERIES Service Manual

vii
Preface
Related Documents
8/27/08 Thermal Transfer G-Series
TM
Service Manual 980618-001 A
Related Documents
The following documents might be helpful references:
• GX420t / GX430t User Guide
• GK420t User Guide
• ZPL II
®
Programming Guide
• EPL® Programmer’s Guide
Caution • Advises you that failure to take or avoid a specific action could result in physical
harm to you.
Caution • Advises you that failure to take or avoid a specific action could result in physical
harm to the hardware.
Caution • Advises you need to wear protective eyeware.
Important • Advises you of information that is essential to complete a task.
Note • Indicates neutral or positive information that emphasizes or supplements important
points of the main text.
Example • Provides an example, often a scenario, to better clarify a section of text.
To ols • Tells you what tools you need to complete a given task.

Zebra G SERIES Specifications

General

Print Method	Thermal Transfer
Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Maximum Print Length	39 inches (991 mm)
Media Sensors	Reflective, Transmissive
Media Length	39"/991 mm
Programming Languages	ZPL II
Connectivity	USB, Serial, Parallel, Ethernet (depending on model)