Zebra LI2208 - Page 224

A - 4 LI2208 PRODUCT REFERENCE GUIDE
Miscellaneous Options
Transmit Code ID Character None 7-20
Prefix Value 7013 <CR><LF> 7-21
Suffix 1 Value
Suffix 2 Value
7013 <CR><LF> 7-21
Scan Data Transmission Format Data as is 7-23
FN1 Substitution Values 7013 <CR><LF> 7-24
Transmit “No Read” Message Disable 7-25
Unsolicited Heartbeat Interval Disable 7-26
Enter Key (Carriage Return/Line Feed) 7-27
Tab Key 7-27
Symbologies
Disable All Code Types N/A
8-6
Enable All Code Types
N/A
8-6
UPC/EAN
UPC-A Enable 8-7
UPC-E Enable 8-7
UPC-E1 Disable 8-8
EAN-8/JAN 8 Enable 8-8
EAN-13/JAN 13 Enable 8-9
Bookland EAN Disable 8-9
Decode UPC/EAN/JAN Supplementals (2 and 5 digits) Ignore 8-11
User-Programmable Supplementals None 8-13
UPC/EAN/JAN Supplemental Redundancy 10 8-13
UPC/EAN/JAN Supplemental AIM ID Format Combined 8-13
Transmit UPC-A Check Digit Enable 8-15
Transmit UPC-E Check Digit Enable 8-15
Transmit UPC-E1 Check Digit Enable 8-16
UPC-A Preamble System Character 8-16
UPC-E Preamble System Character 8-17
Table A-1 Standard Default Parameters Table (Continued)
Parameter Default
Page
Number
1
User selection is required to configure this interface and this is the most common selection.