119
Print Server Web Pages
Print Server Features
11/21/13 P1043301-005
POP3 Email Printing
This feature helps you set up the print server to
receive email messages containing formats
that can be printed. The POP3 settings must be
set to retrieve emails from the email server.
Important • Zebra recommends setting the
POP3 polling interval no lower than 30. Some
email servers will lock accounts after repeated
login attempts.
Output Port Configuration
This feature allows you to change the Parallel
Port Mode setting.
Selections for Parallel Port Mode include
Compatibility, Nibble, Byte, and ECP.
• Compatibility is a unidirectional forward
mode used only for sending data to the
printer.
• Nibble, Byte, and ECP modes are all
bidirectional modes. Data can be sent to
and from the printer.
• Nibble mode sends only 4 bits of data at
a time in the reverse direction from the
printer to the print server. When in
nibble mode, communications from the
print server to the printer are
accomplished via compatibility mode.
• Byte mode sends a full byte of data at a
time in the reverse direction from the
printer to the print server. When in byte
mode, communications from the print
server to the printer are accomplished
via compatibility mode.
• ECP mode is a complete forward and
reverse mode that more efficiently
transfers data.
Table 19 • Print Server Configuration Menu Options (Continued)
To Next Page
Loading...
Need help?
General
