Zebra Net User Manual

Installation
Install a Radio Card in a Wireless Print Server
40
P1043301-005 11/21/13
5. Place the RF card cover over the wireless radio card, and secure it with a small screw.
6. Turn on (I) the printer.
The printer restarts and uses the wireless radio card to communicate with your WLAN.
Allow several minutes for the printer to connect to the network. For more information
about wireless status, refer to View Wireless Status through the Control Panel on page 52
or Troubleshooting the Wireless Print Server on page 139.
Note • The S4M, ZM400, ZM600, RZ400, and RZ600 printers do not use the RF card
cover.
1
Clear plastic RF card cover
(not used on all printers)
2
Screw
3
Compact Flash wireless
radio card and adapter
3
1
2

Zebra Net Specifications

General

Brand	Zebra
Model	Net
Category	Print Server
Language	English