fAccessories
149
2.
Rotate the bottom of the device up.
Vehicle Cradle
Install the vehicle mount on a surface of your vehicle that is flat and free of dirt and oil. Clean the mounting
surface with a glass cleaner and a clean cotton cloth. Install the vehicle mount on the windshield or other
flat car surface using the supplied disc.
Assembling the Mount
1. Remove all parts from plastic bags.
2. Insert the rubber gasket into the socket with the flat side against the holder.
3. Insert the arm ball through the nut and into the socket on the holder.
4. Secure nut but do not tighten at this time.
To Next Page
Loading...