19
Getting Started
This section provides information to get the device up and running for the first time.
Unpacking
To unpack the device:
1. Carefully remove all protective material from the device and save the shipping container for later
storage and shipping.
2. Verify that the following items were received:
• Touch computer
• PowerPrecision Lithium-ion battery
• Regulatory Guide.
3. Inspect the equipment for damage. If any equipment is missing or damaged, contact Customer Support
center immediately. See Service Information.
4. Prior to using the device for the first time, remove the protective shipping film that covers the exit
window, touch screen, and rear camera.
To Next Page
Loading...