Zebra ZD200 Series

Media
126
Label Dispenser (Peeler)
The printer supports a field installed label dispense option with label taken sensor for batch processing of
labels.
• Paper Thickness:
• Min. 0.06 mm (0.0024 inches)
• Max. 0.1905 mm (0.0075 inches)
• Media Width:
• Min.15 mm (0.585 inches)
• Thermal Transfer Printers Max. 12mm (4.41 inches)
• Direct Thermal Printers Max. 108mm (4.25 inches)
• Label Length:
• All Printers Max. (theoretical): 990mm (39 inches)
• Thermal Transfer Printers Max. (tested): 279.4mm (11 inches)
• Direct Thermal Printers Max. (tested): 330mm (13 inches).
• All Printers Min.: 12.7mm (0.5 inches).
Cutter
The printer supports a field installed media cutter option for full width cutting of label liner, tag or receipt
media.
• A medium duty cutter for cutting label liner and light tag media (LINER/TAG). Do not cut through
labels, adhesive or embedded circuitry.
• Paper Thickness:
• Min. 0.06 mm (0.0024 inches)
• Max. 0.1905 mm (0.0075 inches)
• Cut Width:
• Min.15 mm (0.585 inches)
• Thermal Transfer Printers Max. 12mm (4.41 inches)
• Direct Thermal Printers Max. 108mm (4.25 inches)
• Minimum distance between cuts (label length): 25.4 mm (1 inch). Cutting shorter media lengths
between the cuts may cause the cutter to jam or error.
• By design, the cutter is self cleaning and does not require preventive maintenance of the internal
cutter mechanism.