ZPL Configuration
129
ZPL Printer Configuration Format
Managing more than one printer can be done by creating a printer configuration programming file to send
to one or more printers or ZebraNet ™ Bridge can be used to clone a printer’s setup. Figure 1 below shows
the basic structure of a ZPL programming configuration file.
See the ZPL programmer’s guide and the Configuration Setting to Command Cross-reference to create a
programming file. The Zebra Setup Utility (ZSU) can be used to send programming files to the printer.
Windows Notepad (text editor) can be used to create programing files.
Figure 1 • Configuration Parameter Format Structure
To Next Page
Loading...