Setup for Windows
®
OS
70
Test Print with a Copied ZPL Command File for Non-Windows Operating Systems:
1. Create a text file with the following ASCII three characters: ~WC
2. Save the file as:
TEST.ZPL (an arbitrary file name and extension name).
3. Copy the file to the printer. For DOS, a file sent to a printer connected to the system’s serial port would
be as simple as:
COPY TEST.ZPL COM1
Other interface connection types and operating systems will have different command strings. See your
operating system documentation for detailed instructions to copy to the appropriate printer interface for
this test.
To Next Page
Loading...