Maintenance
86
Cutter Option
Interval: Not an operator serviceable component. Do Not Clean inside the cutter opening or blade
mechanism. You may use the Exterior cleaning to clean the cutter bezel (housing).
Method: Call a service technician.
Procedure: Not applicable.
Cut Warning • There are no operator serviceable parts in the cutter unit. Never remove the cutter cover (bezel). Never
attempt to insert objects or fingers in to the cutter mechanism.
Important • The blade has a special coating to resist adhesives and wear. Cleaning it may ruin the blade.
Important • Using unapproved tools, cotton swabs, solvents (including alcohol), etc.; all may damage or shorten the
cutter’s usable life or cause the cutter to bind.
To Next Page
Loading...