Zero 88 Solution User Manual

Submaster Faders
The Submaster faders are used to output channel data (scenes) or chases. The fader controls the output level of the
intensity channels and triggers the LTP channels in the programmed data.
Submaster Flash Buttons
The Submaster ash buttons, located below each of the submaster faders are used to ash, solo or latch the data
programmed on the submaster. The action of these buttons is user denable via the Submaster Setup Window.
These buttons are also used to select submasters when in the Submaster Window.
Submaster Page Controls and Display
The current Submaster Page (1-20) is indicated on the dual seven segment display.
The PAGE UP and PAGE DOWN keys are used to select the required submaster page.
Pressing the PAGE UP and PAGE DOWN keys together selects submaster Page 1.
Submaster Step Button
The Submaster STEP button is used to manually step through any chases with manual drive being output on the
submasters, or to initiate Beat tempo matching.
8
Submaster Controls
Figure 6 - Submaster Controls

Zero 88 Solution Specifications

General

Brand	Zero 88
Model	Solution
Category	DJ Equipment
Language	English