106
ELECTRICAL INSTALLATION
NM13N105
LIGHTS ADJUSTMENT IN CAB ROOF CHECK
No point of a lit surface lying on the level of road to the left from longitudinal vertical
surface passing through the centre of headlight must be further from the front line of
the tractor than 30 m.
In horizontal direction, headlight beams must be parallel with longitudinal axis of trac-
tor symmetry.
Perform the lights adjustment check with service weight of the tractor. Front roof
headlights can be used for operation on roads only in such cases when a front
mounted tool is hanged on the tractor or a device covering main headlights (in trac-
tor’s grill).
To Next Page
Loading...
