Zetor Major 80 - Front Wheels Toe-In

90
WHEEL TRACK CHANGE
C505
FRONT WHEELS TOE-IN
The value of toe-in of front wheels taken
on the rim of a tractor:
− With non-driven axle 2 to 6 mm
− With driven axle 0 to 4 mm
“S“ toe-in is given by the difference of
measured values: S = b - a.
Before checking toe-in, it is
necessary to check or adjust the
clearance in front wheels
bearings and inflate front tires to
prescribed pressure.
The measurement of toe-in is
done on wheel rims.