71
HYDRAULIC EQUIPMENT
NM13N012 NM13N013
SPEED OF THREE-POINT LINKAGE
LOWERING CONTROL
Speed of three-point linkage lowering
control (3) serves for setting the speed of
lowering three-point linkage arms. When
turning the control of speed of three-
point linkage lowering in (b) direction the
speed of three-point linkage arms lower-
ing decreases, in (a) direction it in-
creases. If we turn speed of lowering
control (b) to stop, the arms of three-
point linkage cannot be lowered.
HYDRAULIC SENSITIVITY SYSTEM
CONTROL
Hydraulic sensitivity system control (4)
serves for setting hydraulic system sen-
sitivity with power or mixed regulation.
When turning the control in the direction
(a), the sensitivity of the system in-
creases, in (b) direction it decreases.
To Next Page
Loading...
