108
MAINTENANCE OF THE TRACTOR
STEPS TAKEN DAILY ALWAYS BEFORE STARTING THE WORKS
Before starting the engine
Amount of oil in the engine check
Amount of coolant and joint tightness in the cooling system
check
Checking the amount of oil in the hydrostatic steering circuit
tank
Checking the amount of oil in gear box and final drive housing
Air cleaner indicator contamination check
Air pressure in all tires check
Wheels tightening check
Auxiliary and connecting tools check
After starting the engine
Engine greasing function check (control)
Charging function check (control)
Steering function check (control)
Steering circuit function and tightness check
Efficiency and function of tractor brakes check
Efficiency and function of trailer or semi-trailer brakes check
STEPS TAKEN AFTER EVERY 100 HOURS OF OPERATION
Greasing the tractor based on a greasing plan
Cleaning radiator discs by air pressure
Dry air filter maintenance (maintain according to pollution indicator signalization)
Checking the amount of oil in the gear box and final drive housing
Checking the amount of oil in reducers and front drive axle box
Draining condensate from air collector
To Next Page
Loading...
