52
DRIVING OPERATION
C231 NM13N087
HYDROSTATIC STEERING FAILURE
WARNING SIGNALIZATION
Hydrostatic steering pump failure is with
pressure drop under 120 kPa behind the
pump signalized on the dashboard by an
applicable symbol.
Note: When starting the engine or with
low engine revolutions, the control may
be blinking, if after starting or revolutions
increase engine control goes out, it is not
a failure. The system is alright.
IMPORTANT NOTIFICATION
If greasing, charging or hydrostatic steer-
ing failure controls light up, stop the
engine immediately and contact service.
You will prevent a serious failure or trac-
tor accident.
To Next Page
Loading...
