ZinWave UNITIVITY 5000 - Remote Unit Leds

UNItivity 5000
User Manual
Copyright © 2022 Zinwave. All rights reserved. 3-15
3.5 Remote Unit LEDs
There is a single LED on the Remote Unit visible at the fiber end plate.
LED
Color
Description
Off
No power to Remote Unit
Red
No connection to Hub
Red Flash
Alarm active
Alternate Red/
Green
Associating with Hub
Green Flash
Unit successfully associated with Hub.
Optical link calibration and auto-setup in progress, and/or Remote Unit radio
transceiver disabled.
Green
Remote Unit fully operational