UNItivity 5000 Understanding the Configuration GUI
User Manual
Copyright © 2022 Zinwave. All rights reserved. 9-3
To change the IP address of the standalone PC:
1. Set the standalone PC to use a static IP address on the same subnet e.g. 192.168.0.3, with
a subnet mask of 255.255.255.0.
2. Make an Ethernet connection from the standalone PC to the Primary Hub (either a crossover
or straight-through Ethernet cable can be used).
3. Access the GUI as described in “Accessing the GUI” and go to the Hub Setup page to
change the IP address. See “IP Settings”.
To Next Page
Loading...