ZinWave UNITIVITY 5000 - Page 68

UNItivity 5000 Understanding the Configuration GUI
User Manual
Copyright © 2022 Zinwave. All rights reserved. 9-5
Username
Default Password
Description
viewer
No Password
View system status but cannot make
any changes.
basic
installer
View system status and can make only
a subset of configuration changes.
advanced
supervisor
View and change all options.
See “Changing User Passwords and Timeouts” for information on changing passwords.
9. Click Log In.
10. On successful login, the System Status window appears. The left navigation menu allows
access to all other screens in the application.
The table below outlines specific actions available to a “basic” user:
Page
Setting
Permission
System
Setup
Setting up the Hub
system
Read-only access.
Event Log
Logging and
Filtering
Start and stop System logging, Download Event and System
logs, and start and stop event log filtering. (Same as an
“advanced” user.)
Hub Setup
All, except Security
Settings
Read-only access.
Hub Setup
Security Settings
Can change “basic” user’s password (Not “advanced” user.)
Can set the “Inactivity Timeout” period (but, NOT set it to
“Keep me logged in”.)
Alarms
Setup
All
Can change the Warning LEDs configuration.
Can configure and customize the Warning and Fault relays
(Same as an “advanced” user.)
Software
Upgrade
All
No privileges to upgrade software.
System
Maintenance
All
No privileges to schedule or run System Maintenance tasks.
System
Views
All
Can open and view all System Views.
Can save System Snapshot Report.
(Same as an “advanced” user.)
Actions
(Dropdown)
All
No privileges to Save or Load configuration.
Cannot Download System Tables.