ZKTeco C2-260/inBio2-260 User Manual

C2-260/inBio2-260 Access Control Panel User Manual
Page | 31 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
 Disable/Enable
Select a device, click
Disable/ Enable
to stop/ start using the device. When the communication between
the device and the system is interrupted, or the device fails, the device may automatically appear in
disabled status. After adjusting the local network or device, click
Enable
to reconnect the device and
restore device communication.
 Synchronize All Data to Devices
To synchronize data of the system to the device, select the device and click
Synchronize All Data to
Devices
and click
OK
to complete synchronization.

ZKTeco C2-260/inBio2-260 Specifications

General

Brand	ZKTeco
Model	C2-260/inBio2-260
Category	IP Access Controllers
Language	English