C2-260/inBio2-260 Access Control Panel
User Manual
Page | 37 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Department: Select from the drop-down menu and click OK. If the department was not set previously,
only one department named Company Name would appear.
First Name/Last Name: The maximum number of characters is 50.
Gender: Set the gender of personnel.
Mobile Phone: Enter the phone number of the user.
Certificate Type: There are four types of certificates: ID, Passport, Driver's License, and others.
Certificate Number: Enter the Certificate number.
Birthday: Enter the employee's Date of Birth.
Email: Enter the employee’s Email ID. The max length is 30 characters.
Device Verification Password: Set the password for verifying with the device using personnel accounts.
It can only contain up to 6-digits. It cannot be the same with other user’s password and the duress
password.
Card number: The max length is 10, and it should not be repeated.
Personal Photo: The picture preview function is provided, supporting common picture formats, such as
JPG, JPEG, BMP, PNG, GIF, etc. The best size is 120×140 pixels.
Browse: Click Browse to select a photo on your local drive to upload.
Capture: Taking a photo by a camera is allowed when the server is connected with a camera.
Register Fingerprint / Finger Vein: Enroll the Personnel Fingerprint, Finger Vein, Palm, or Face. To trigger
the alarm and send the signal to the system, scan the Duress Fingerprint.
How to register fingerprint:
1. Move the cursor to the fingerprint icon position, a registration pop-up or driver download dialog
box will appear, click Register.
2. Select a fingerprint, press the finger on the sensor continuously until the message “Fingerprint
registered Successfully” is prompted.
3. Click OK to complete the registration.
To Next Page
Loading...
