C2-260/inBio2-260 Access Control Panel
User Manual
Page | 38 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Click a fingerprint to delete. If you need to register a duress fingerprint, select the Duress Fingerprint
checkbox.
Notes:
1. If fingerprints are duplicated, “Don’t repeat the fingerprint entry” will be prompted.
2. If the fingerprint sensor driver is not installed, click “Install driver” and the system will prompt to
download and install the driver.
3. After installing the fingerprint sensor driver, if the fingerprint register button is grey in IE
browser while it is normal in other browsers (such as Firefox, Google), you can change the
settings of IE browser, as per the following:
a. In Internet Explorer, click Tools > Internet Options > Security > Credible Sites, add
http://localhost to the credible sites, then restart the Internet Explorer.
b. In Internet Explorer, click Tools > Internet Options > Advanced > Reset to pop up a dialog
of Reset Internet Explorer Settings, click Reset to confirm, then restart the Internet Explorer
(you may try when Point 1 does not help).
c. If all the above settings do not work, please execute the following operations (take IE11
browser as an example): click Tools > Internet Options > Advanced > Security, check the
option [Allow the software to run or install even if the signature is ...], and remove the
selection of [Check for server certificate revocation], then restart IE.
d. If the browser version is below IE8, the fingerprint registration page will be different:
To Next Page
Loading...
Need help?
General
