5. Basic Operating Instruction
③ Step Presser Pedal
Step the left pedal (5) to lower the presser
④ Step the Start Pedal
Step the right pedal (6) to make the
cloth-feeding board move to the position of
sewing start.
⑤ Step Pedal（6）or press
to start
the sewing under Test Mode.
or
（2 stitches will be sewn at each pressing.）
（Holding for continuous sewing）
Note: the leftover stitch number (4)
displayed at the data display area will reduce 2
stitches at each time.
The buzzer will work at the last stitch.
No thread-trimming actions and knife
actions in test mode.
⑥ If user wishes the cloth-feeding board to
return to the cloth setting position at the
ending of the test:
Please press Pause switch (7), and then
press
.
28
To Next Page
Loading...
